BPDCQ - 3-4920, PANTONE RUBBER BASE INKS
- MSDS: BPDCQ
- Manufacturer: A B DICK CO
- Product Name: 3-4920, PANTONE RUBBER BASE INKS
- National Stock Number: 7510-00N029813
Product Identification
Product ID:3-4920, PANTONE RUBBER BASE INKS
MSDS Date:06/16/1986
FSC:7510
NIIN:00N029813
MSDS Number: BPDCQ
Responsible Party
CHICAGO, IL 60648
US
Emergency Phone: 312-763-1900
Info Phone: 312-763-1900
Preparer: KENNETH W. PINTER
Cage: HO951
Contractor
Telephone: 312-647-8800
Cage: HO951
Ingredients
DISTILLATES (PETROLEUM), HYDROTREATED MIDDLE; (PETROLEUM
CAS: 64742-46-7
RTECS: JN9379645
Fraction By Weight: 7-12%
OSHA PEL 5 MG/M3 (OIL MIST)
ACGIH TLV: 5 MG/M3 (OIL MIST)
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGEST:MAY CAUSE IRRITATION OR GASTRIC
DISTURBANCE. EYE:MAY BE SLIGHTLY IRRITATING UPON DIRECT CONTACT.
SKIN:MAY CAUSE IRRITATION AND DERMATITIS. DERMATITIS IS
CHARACTERIZED BY DRYNESS, CHAPPING AND R EDDNESS. INHAL:OIL MIST
MAY CAUSE IRRITATION OF THROAT AND LUNGS. 5 MG/M3 FOR OIL MIST IN
AIR. NORMALLY(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:NOT A PROBLEM WITH THIS MATERIAL.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INGEST:DO NOT INDUCE VOMITING. CONSULT MD. EYES:RINSE
THOROUGHLY WITH WATER FOR AT LEAST 15 MINUTES. IF IRRITATION
PERSISTS, CONTACT MD. SKIN:WASH WITH SOAP AND WATER. IF IRRITATION
PERSISTS, CONSULT MD. INHAL:REMOVE TO FRESH AIR. APPLY OXYGEN IF
NEEDED. CONSULT MD.
Fire Fighting
Extinguishing Media:WATER FOG, FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . WATER MAY BE INEFFECTIVE, BUT CAN BE USED TO
COOL CONTAINERS EXPOSED TO HEAT OR FLAME.
Unusual Fire/Explosion Hazard:DENSE SMOKE MAY BE GENERATED WHILE
BURNING.
Accidental Release
Spill Release Procedures:WIPE UP AND DISPOSE OF WITH SOLID WASTE. IF
SOLVENT WETTED WIPES WERE USED, DISPOSE OF IN APPROVED CONTAINERS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP CONTAINS CLOSED WHEN NOT IN USE.
KEEP CONTAINERS AWAY FROM EXCESSIVE HEAT, SPARKS AND OPEN FLAME.
Other Precautions:WASH HANDS AND FACE WITH SOAP AND WATER BEFORE EATING
OR SMOKING. FOR INDUSTRIAL USE ONLY.
Exposure Controls
Respiratory Protection:NOT NORMALLY REQUIRED. USE NIOSH/MSHA APPROVED
RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:MECHANICAL (GENERAL) VENTILATION IS ACCEPTABLE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:APRON, BOOTS, IMPERVIOUS CLOTHING AS NEEDED
TO AVOID EXCESSIVE SKIN CONTACT.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
SPECIFIC GRAVITY:1.02-1.11 (H2O = 1)
Chemical Properties
HCC:N1
Vapor Density:>1
Spec Gravity:(SUPDAT)
Solubility in Water:INSOLUBLE
Appearance and Odor:VARIOUS COLOR PASTE WITH A INK VARNISH ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING METERIALS.
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:CO, CO2 AND SMOKE.
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS FOR NON-FLAMMABLE OILY WASTE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.